Let us know about your residential project and we’ll tailor a solution for your pool with one of our Pool Void Covers® systems.
For a quote, we only need some simple information, but if available, we ask for a copy of the builder drawings.
For a system to be installed, we must know accurate dimensions of the void and access requirements – so each job has a pre-site inspection and measure up.
This allows us to ensure the installation is done correctly – first time, every time.
Throughout the process, from initial quote enquiry to installation, and demobilisation – our friendly professional team will provide you with all the right advice, documentation and certification.
Please review our internal process as per our capabilities below.
Build sites we have worked on
Our Pool Void Covers® system are specifically engineer-designed to comply with Australian regulations. Used on existing or new sleeper pools.
For concrete and fibreglass pools in any shape including kidney styles.
Signing off on safety and confirming all requirements meet Australian Standards.
Pool Void Covers® come highly recommended by house builders and pool builders and can be seen on residential constructions sites across Sydney, Brisbane and Melbourne.
All of our platforms are minimum scaffold rated to 225kg SWL with a large safety factor incorporated. We also supply a 450kg SWL system for larger scaffold systems.
Our Pool Void Covers® system can be installed for long periods at a time – allowing for peace of mind from knock down rebuild and house building to lock up stage. Our system meets all safety regulations; ensures a safe working environment for the contractors; and provides a safe area whilst existing pool fencing may be removed.
Depending on the distance of your pool from your house, you may need to cover the pool when contractors/builders are working on your roof, or when scaffolding is required around your house build. In addition, the system has also been designed, so that for existing pools, it is easy to install, and causes no damage to your existing pool upon installation and removal.
Pool Void Covers® ensure safety by preventing accidents and keeping unwanted debris out, protecting your pool and providing peace of mind
If installed onto an existing pool, we can supply additional protection for your existing tiles/pavers.
We tailor a Pool Void Cover® to suit any type of pool.
We have solutions to ensure all features of your pool is protected.
Our Pool Void Covers® system is a trafficable working platform for the following types of pool set ups:
All of our platforms are minimum rated to 225kg Safe Working Load (SWL), with a large safety factor incorporated. We have three different types of covers – Aluminium frames to 225kg SWL, Structural steel beam system to 225kg SWL and Structural steel beam to 450kg SWL. All Pool Void Covers® systems are scaffold rated. We have in-house engineering to provide all safety checks and confirm requirements.
All manufacturing is undertaken in Australia, ensuring the finished product is compliant with strict Australian standards.
Supply chain monitoring and full traceability systems are utilised to ensure all equipment is within certified engineering and Australian standards.
All units are quality inspected and checked before dispatch, as per a strict quality control process.
All materials through the supply chain are sourced according to the certified engineering recommendations, including material grade rating and structural specification
We offer a full 100% guarantee of compliance to all Australian regulations – and full 100% guarantee of correct handover to all house builders/site managers. Our Pool Void Covers® system is specifically engineer-designed to comply with Australian regulations.
All covers are installed with a CPR sign and Engineering Sign attached to the cover, and a Warning/Engineering sign at the site access point.
Copies of insurance documents.
Form 15 Engineering Certificate of the complete engineered system.
Site safety forms and compliance, signed installation form by an engineer-qualified installer.
Our Pool Void Covers® system are specifically engineer-designed to comply with Australian regulations. Used on existing or new sleeper pools.
There are a number of components to a Pool Void Covers® system, these include:
We can cover a small plunge pool to a large commercial swimming pool – our systems are modular so can be made as small, or as large, as you require. Our 225kg SWL Scaffold Rated Pool Void Covers® can cover a pool waterline width of up to 7 metres, without the need for acrow props. The length of the pool is unlimited, we have covered lap pools to over 30m+ length. Used on sleeper pools whilst the house build is completed.
Our system is the number one choice for ensuring your pool is safe whilst work is being undertaken in the pool area. The system can be installed for long periods at a time – allowing for peace of mind from knock down rebuild and house building to lock up stage.
For existing pool owners – when major works are being undertaken on your property – this system meets all safety regulations; ensures a safe working environment for the contractors; and provides a safe area whilst existing pool fencing may be removed.
In addition, depending on the distance of your pool from your house, you may need to cover the pool when contractors/builders are working on your roof, or when scaffolding is required around your house build.
In addition, the system has also been designed, so that for existing pools, it is easy to install, and causes no damage to your existing pool upon installation and removal.
The normal applications for the Pool Void Covers® system are:
The cost is dependent on a number of factors – the size of the pool, the safety rating you require, and the duration of the rental period.
Click on the ‘Get Quote’ button – and we will specify a system entirely for your requirements.
No, we do not retail our systems – as we are a rental company.
Our systems are designed and manufactured by us in Australia.
Click on the ‘Get Quote’ button, and we will specify the right number of panels and requirements for your local agent.
The system has been designed to be easy to install and remove, but due to the high risk of our business – working at heights, building site requirements, working near open water – our systems are only installed by our in-house teams – who are trained professionals and had the appropriate training.
After install, the system is signed off with an Engineering Certificate.
The time to install the cover depends on the access to the pool area, and the size of the pool to be covered. Installation can take from 30 minutes for a small plunge pool to 2 hours for a larger pool.
The simple answer is yes, we can cover any shape pool, and any type of pool.
We have different systems to adapt to your own requirements – so if you have a feature wall, or a waterfall feature – or a large rockery alongside the pool – we can still install a system to meet your requirements.
Our in-house engineering team will review your requirements and come up with a system for you.
There are a number of manufacturers of plunge style pools that have different loading requirements, and we modify our systems to meet the pool manufacturers designs.
There are some unique style of pools on the market, and some do not allow you to put any weight on the side of the pool at all. This can be an issue if you need to put scaffold over the top of your pool.
We have designed scaffold rated engineered Pool Void Covers® that are ‘floating’ and do not even physically touch your pool.
